SIL-ALL® 4 X 4 Liquid Forage Treatment

Sil-All®

SIL-ALL® 4 X 4 WS Water Soluble silage inoculant is a blend of bacteria and enzymes in a concentrated form for the preparation of silage. When mixed according to directions, it can be applied as a liquid directly to legumes, corn and sorghum silages and high moisture grains to aid in the fermentation process.

 

About the Product

Effective
SIL-ALL 4 X 4 WS silage inoculant uses a combination of bacteria to aid in the fermentation of ensiled materials by rapidly lowering the pH of the forage or high moisture grains to protect proteins. Faster fermentation will minimize ensiling losses and conserve dry matter to boost feed value. SIL-ALL 4 X 4WS is formulated to minimize unpalatable acetic acid production.

Four specially selected strains of lactic acid-producing bacteria give SIL-ALL 4 X 4 the ability to operate effectively across a wide range of conditions. These beneficial strains dominate the less efficient naturally occurring bacteria, thereby increasing the effectiveness of fermentation and reducing effluent loss.

At the same time, four different enzymes work to release extra sugars quickly and efficiently from the different carbohydrate sources in the forage. This is particularly important in difficult ensiling conditions.

Versatile and Easy To Store
SIL-ALL 4 X 4 silage inoculant, when diluted for application, is applied as a liquid spray designed for uniform application. It can be used on alfalfa, grass, whole plant corn, high moisture corn, sorghum and small grain silages.

SIL-ALL 4 X 4 is ideal for silage in big bales as well as bunker and tower silos. It is effective across a range of ensiling conditions. SIL-ALL 4 X 4 is convenient to store and is stable for 18 months in an unopened container.

Feeding Directions

SIL-ALL4 X 4 WS MIXING DIRECTIONS:
Mix 1 pouch SIL-ALL4 X 4 WS silage inoculant thoroughly with 25 gallons  clean, cold or cool, potable water.  Apply at one quart per one ton of fresh corn silag crop usinga suitable, calibrated liquid spray applicator.  Double the application rate for high moisture corn and challenging forages/haylages.

SIL-ALL 4 X 4 WS 10X MIXING DIRECTIONS:
Mix 1 pouch (250 gram) SIL-ALL4 X 4  WS 10X silage inoculant thoroughly in 250 gallons of water. Following the application equipment manufacturer’s directions, provide a final delivery rate so that one gallon of this inoculant solution will treat one ton of legume, small grain, or high moisture grain silages. Apply 0.5 gallon of the inoculant solution to treat one ton of corn or sorghum silages.

 

APPLICATION RATES: SIL-ALL4X4  WS SIL-ALL4X4  WS 10X
Legume silages (alfalfa, clovers) 3.53 oz. (100 gm) treats 55 tons 250 gm treats 250 tons
Small grain silages (wheat, barley) 3.53 oz. (100 gm) treats 55 tons 250 gm treats 250 tons
High moisture grains (28-35%) 3.53 oz. (100 gm) treats 55 tons 250 gm treats 250 tons
Corn or sorhum silage  3.53 oz. (100 gm) treats 110 tons 250 gm treats 500 tons

Management Tips

Always employ good silage management practices.

Storage and Handling Tips: 
Store SIL-ALL4x4 WS Silage Inoculant in a cool, dry area. Refrigerate if storing for a long period of time. Shelf life under these conditions is 18 months.

Silage Management Tips:

  • Cut and wilt forage during favorable weather conditions.
  • Harvest forage or grain at ideal maturity and at correct moisture levels.
  • Always use a moisture meter when possible.
  • Chop to optimum length based on forage type and processing to ensure adequate packing.
  • Add SIL-ALL4x4 WS silage inoculant uniformly at correct usage levels.
  • Ensile the forage as quickly as possible.
  • Pack well and seal or cover securely

NOTICE: Due to conditions of use which are beyond our control, no expressed or implied warranties are made for this product beyond the guaranteed microbial analysis.

Sil-All® is a registered trademark of Lallemand Animal Nutrition, Milwaukee, WI

Product Number

#8927—SIL-ALL®4 X 4  WS Silage Inoculant, 50 x 3.53 oz. (100 gm) foil pouch
#8024—SIL-ALL®4 X 4  WS 10X, 250 gm pouch