Blueprint® Co-Product Mineral is a loose mineral for beef cattle being fed rations containing ethanol co-products.
- If cows are fed a total mixed ration with high levels of corn co-products (e.g., distillers grains or gluten feed), this mineral will properly balance the macromineral profile of rations
- When grass greens up and products containing co-products are no longer being fed, this product may be fed during grazing
- Designed to provide optimal digestion and nutrient absorption
- Unlocks efficiency and animal performance
- Readily available organic trace minerals maximize immune health and performance
Nutrient Analysis |
|
|---|---|
|
Calcium, min |
19.5% |
|
Calcium, max |
23.4% |
|
Salt, min |
19.0% |
|
Salt, max |
22.8% |
|
Magnesium, min |
4.5% |
|
Copper, min |
660 PPM |
|
Selenium, min |
26.4 PPM |
|
Zinc, min |
1,938 PPM |
|
Vitamin A, min |
300,000 IU/LB |
|
Vitamin D, min |
30,000 IU/LB |
|
Vitamin E, min |
1,000 IU/LB |
Feed Blueprint® Co-Product Mineral free choice to cows and heifers in mineral boxes or feeders. Start feeding approximately 30 days before calving until 30 days after calving. Cows should consume approximately 4 ounces per head per day. For best results place a 2 week supply of mineral in the feeder. Check often and replenish as necessary. Do not provide additional salt. Provide a constant supply of clean, fresh water.
This product, which contains added copper, should not be fed to sheep or related species that have a low tolerance to copper. This product has been formulated specifically for beef cattle and is not intended for other species.
Follow label directions. Adding higher-than-recommended levels of this supplement to feed containing added selenium is not advisable.
Hubbard Feeds does not use restricted-use proteins in products and follows both FDA and state requirements regarding the use, handling and storage of restricted-use proteins
#74064 – Blueprint® Co-Product Mineral, 50 lb bag
#74065 – Blueprint® Co-Product Mineral Bio-Mos® 2, 50 lb bag